R n R beds for T4's and T5's

[Cannon's Forge]

Originally Posted by SkyMonster

By how much would you go bigger? Going to get them done locally and been quoted £85 for 4".

5mm all round will be ok

[Redimp]

Another well chuffed Cannons Forge Rock and Roll Bed owner. Just had my bespoke 1300mm wide three seater installed 600mm further forward than standard to allow for rear kitchen unit, and allow the kids to see out of the windows.

From my sketchy brief Dave knew a solution for me straight away, and i'm really pleased with the outcome.. plus alot cheaper than having rails fitted. The solid build quality was a must, as the kids will be travelling on this seat, that's why I chose Cannons Forge. Even though their order book is massive at the moment, they still managed to get my seat fitted in good time. These guys are true T4 / T5 Legends! I'd recommend them any day. Thanks Cannons Forge.

[urban_terra]

I had my cannon forge bed fitted today and yes they are they are of excellent quality and look the dogs. Just need to get my cupboards fitted to get the full effect. But might try a night out on the bed before just to try it out.

Thanks Dave.

Top bloke would recommend if you want a rock n roll bed.

[Simon_B]

Ditto to all of the comments made previously, had mine fitted on Thu - quality. Haven't seen any mention yet of the best bit - his van reg.................

Now for some shiny black rims.............................................. .................................................. ....

[worthy79]

Originally Posted by conners t5

daves beds are fantastic and i wouldn't really worry about testing. there anchored properly .i've driven bomber cars for years and know a thing a two about what can take a impact.

Just out of interest as looking into getting a R n R bed, when mounting the bed in a T4, the bed has to be mounted into the chasis, would the wooden floor need to be taken up first to establish where the bed would be attached or could it go straight through the wood as well? Is there specific mounting points in the floor?

Thanks

[Cannon's Forge]

Originally Posted by worthy79

Just out of interest as looking into getting a R n R bed, when mounting the bed in a T4, the bed has to be mounted into the chasis, would the wooden floor need to be taken up first to establish where the bed would be attached or could it go straight through the wood as well? Is there specific mounting points in the floor?

Thanks

No, floor is ok down as you can drill from under van in the chassis holes.
Cheers Dave
Ps call me if any doubts 07817389731

[worthy79]

Originally Posted by Cannon's Forge

No, floor is ok down as you can drill from under van in the chassis holes.
Cheers Dave
Ps call me if any doubts 07817389731

Thanks for advice Dave

[steviehype]

Just want to say, thanks to Dave and the boys for fitting my bed last Sat.

I went in with a second hand bed and they serviced the whole thing and made it work sweetly again.

Many thanks!

Steve

[gary217]

Just said cheers to Dave and his mate at Rownhams - he's sorted some issues with my bed that has had a hard, hard life (we tend to tour in Europe for weeks on end and fold the bed up and down each night, load it with luggage in the day and generally abuse it). Fantastic and unbelievable after-sales service and care from CF, great guys to deal with and they really, really know their stuff. We're now set up for our next european tours.

Many, many thanks Dave...hopefully see you soon for yet another bed for my bro's next project....and at least it didn't rain too much this time.

Like someone else commented - love the reg no on your van....but shame on you using a Merc

Cheers!!

[Cannon's Forge]

Originally Posted by gary217

Just said cheers to Dave and his mate at Rownhams - he's sorted some issues with my bed that has had a hard, hard life (we tend to tour in Europe for weeks on end and fold the bed up and down each night, load it with luggage in the day and generally abuse it). Fantastic and unbelievable after-sales service and care from CF, great guys to deal with and they really, really know their stuff. We're now set up for our next european tours.

Many, many thanks Dave...hopefully see you soon for yet another bed for my bro's next project....and at least it didn't rain too much this time.

Like someone else commented - love the reg no on your van....but shame on you using a Merc

Cheers!!

No probs Gary, have the real McCoy plate on my T5
Had an LT god rest her soul