Ok so you are looking to buy a set of rims but are unsure of their pcd, you can quickly check them with the aid of a ruler in seconds
I know some wheels have sizes stamped on them but some don't ....
First off measure the diameter of the hub hole in the wheel, let's say it was 70mm (A)
Then measure from edge of hub hole to centre of any bolt hole , again let's say it was 21mm (B)
Then add A+B+B= pcd
Ie 70+21+21= 112mm pcd
Hope this helps someone out there
I know some wheels have sizes stamped on them but some don't ....
First off measure the diameter of the hub hole in the wheel, let's say it was 70mm (A)
Then measure from edge of hub hole to centre of any bolt hole , again let's say it was 21mm (B)
Then add A+B+B= pcd
Ie 70+21+21= 112mm pcd
Hope this helps someone out there