Looking to apply a carbon fibre look vinyl to a slightly tired looking black pop top roof. Have read up on things and watched loads of videos but there are still a couple of things I can't seem to find.
All the vinyl comes in widths of 1.52m, the roof is just about 1.54m if you...
I need to replace my starter motor on my 2002 2.5 tdi . Can anyone confirm what size hex/allen key socket needed on the starter motor mounting bolts before i start work on it .I have read posts where some say 7mm and others say 6mm (i have a 6mm socket but not a 7mm). Any other tips for a easy...
Picked myself up a set of alloys today for the van. Not been very original unfortunately, they are genuine Audi A8 18 inchers. I just need to get myself a set of bolts, but it seems a bit of a mine field.
Does anything know what bolts I need?
Anyone got any idea what type of wheel bolts I have here - looking to order some more to replace the crappy locking ones I have.
Looking for specs etc to know what to order as I have no idea what to buy.
These are from 19" wheels - 245/40R19
Any help appreciated. Thanks
NOW GONE, no longer for swap or sale!!!!
I'm selling my 19" X5 alloys complete with spigots, bolts and load rated tyres.
The tyres, fronts are 245/45/19 102w make: Wanli ?
the rears are 255/50/19 107w make : Hankook Ventus ST
The tyres have plenty of thread left on them?
The alloys could...
I need to purchase some new bolts that attach the sliding door bracket to the sliding rail at the bottom (on a t4 transporter SWB 1998) as mine have rusted and stripped! Does anyone know what type of screws they are and where I can get them from?
I have Stormer alloys fitted to T5 and just lowered it by 55mm with 15mm spacers on rear. Have some bolts that have a 60mm thread but a little too short, will only go in about three turns so need to find some with a 65mm thread. I have looked everywhere on the net but unable to locate.
Have just ordered up a pair of FASP plates from Jennings for my 97 Velle. As they don't come with fixings I was hoping someone could tell me what exactly is required and if people have bought them off eBay please.
I want to order up so I can get them here ready for the plates when they...
Hello T4'ers of the big wide world,
I've bought myself a set of Audi TT 17" MK2 alloys (ET47) for my T4b 1997 ACV 2.5. I'm pretty new to all this and regularly get confused, so be gentle with me! :) I was wondering if anyone knows...
1. What size (length / radius / head?) wheel nuts I need...
Does anyone have a C-pillar seat belt they don't need anymore?! Am in Cornwall so could collect from pretty much anywhere in the County or would pay for postage if it's not too much.
Also need 4 long mushroom bolts and plates for fitting a seat if anyone happens to have any lying...
Hi. Fairly new to T5 ownership. We have an '05 shuttle in fresco green which the wife calls Matilda? Anyhow, just shelled out rather a lot of the kids inheritance (thanks Theo) on a set of 19" black mesh alloys which have turned this ex posh taxi into a growling beastie. The wheels came complete...
I need 5 wheels nuts as spares just in case I ever need to replace an alloy temporarily.
Tried my wheel nuts today on my steel spare and they tighten up and there's still movement in the wheel.
Sooo, After having the van lowered decided I should get the tracking sorted. Went to get it done, sat there an hour then they came back only to tell me they couldnt do it because all the bolts are seized.
Going to look at them at the weekend but would appreciate any tips / advice you guys might...