Hi got a set of T4 rear seats to fit look like they have come from a mini bus type T4 inca pattern with seat bels fitted!!
What I am wanting to know is any ideas as to length / size of bolts needed? No rails or quick removal the seats will bolt down with stretcher plates below as a permanent fix...
T4 has an R n R bed but no seatbelts.
Has anyone fitted lap belts or otherwise and how does the job affect an MOT. The bed has a steel frame, 1inch box section. I,m thinking of buying lap belts from an auto factor or go on the scrounge at a local scrappers. But I need anchor points...
I would like to fit a 3 point seat belt to my T4
there is a rock n roll bed in the rear, Is it possible to attach all fittings to the bodywork so I can keep the bed as it is
Could do with some advice as to where I can bolt down a set of seats on sliding rails.
From the fixing points in the floor, it would appear that none of the fixing brackets on the rails will line up to where I think I should be bolting through (existing points) Vans an ex AA 1998 and...
I have just purchased some rear seats for my T4. I now need 6 mushroom bolts and I believe a retaining plate for underneath van. Is this correct regards the plate and any advice and where to acquire such items? Many thanks
Hi all out there.
Got a set of caravelle rear seats to go in T4. Problem is, The position I need the seats in the rear, means I have to drill through for the runners directly over the sub frame box sections running front to rear of van. !
Cant move seats left or right, as this puts seats in...
Hi Folks, as a relative newbie myself who needed rear seats I fgure that there are many peeps in the same boat. I know there are bits and bobs about this process all over this site but I thought a few basics might help anyone who does not know where to start.
1) Seats - there are lots available...
I have tried searching but am mighty confused?
I have a 92 autosleeper trident and basically want to know if I can fit a single rear (extra) seat with integral belt and will there be any existing holes/mounting points in floor. I want to fit seat for occassions when I'm carrying extra passenger...