VW T4 Forum - VW T5 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. Interior
    Hey everyone, New T4 owner. Forum has already helped me a lot in my T4 2.5 tdi camper conversion. So thank you! Question, the sliding door appears to be resting on the metal frame - therefore leaving no space for the rubber door seal. (pictures below) Ive changed the door roller (no change)...
  2. Bodywork & Exterior / Detailing & Valeting
    Hello! New to the forum so hello to you all I have just purchased my 2000 1.9td partially converted van and it's great! I do however have a bit of a problem with my sliding door It pops out the top runner when you open it ? You have to open it with one hand on the handle and one hand...
  3. General T5 Technical
    When I purchased my van I noticed that the sliding door isn't completely flush when closed, it's slightly proud on the rear edge. At the time, I had a good look at the door/brackets etc and there's absolutely no evidence of damage/buckling or anything else to explain it. I even spoke to the...
  4. General Van Chat
    Hi All, My first post here so "Hi everyone!". I've recently purchased a 2008 T5 conversion and I've noticed today that the scuff that it has on the nearside wheel arch appears to by due to the interior panel of the sliding door brushing against it when the door is opened. I've seen some posts...
  5. Bodywork & Exterior / Detailing & Valeting
    Hi folks, This is driving me nuts....:( a couple of weeks ago the sliding door on my 1999 t4 seemed to drop asthe top guide runner kept popping out when it got to nearly closed position. I have gone through the previous thread's on this ut nond really seem to have the answer for me. Firstly...
  6. Bodywork & Exterior / Detailing & Valeting
    Is there any threads about or tips etc. My sliding door is doing my nut in as it's squeaking on the door rubber while driving I: It's slightly out of line as per pics below (slightly bigger gap near passenger door) so thought I'd sort is this weekend :) Also seems to be out at the top at...
  7. Bodywork & Exterior / Detailing & Valeting
    I need some help with anyone who's knows how to align the slide door. After replacing the door and then painting the van I am unable to align the rear margain. It pokes out towards the bottom of the door. Any pointers please?
  8. Bodywork & Exterior / Detailing & Valeting
    hi im slightly confused how to relign my side sliding door onn my t4 at the moment the bottom is too far out and the rear top is touching the rear panel please can anyone shed some light please as its started to damage my pa:confused::confused::confused:intwork not impressed
1-8 of 8 Results