spacers

I'm after some info/advice. I thought I'd done enough homework on this one, but the mechanic tells me otherwise! I recently purchased some 19" X5 alloys and spigot/spacer kit. My local tyre shop fitted them all and all good. Well, they didn't tell me otherwise. To finish it off, I purchased...

Just thought I'd try my luck and see if anyone is selling the above. Eibach would also do :D Seen them only for about £120 so will just order from new in the coming weeks if I don't get lucky. Mine's a 2010 SWB T32 Thanks all! Matt

H&R rear wheel spacers Hi all Just bought some Thunder alloys and thinking of adding rear wheel spacers. Anyone on here have this set up? Have measured what I would expect to be distance (wheels not fitted yet) between wheel and arch and thinking of 25mm, rear wheels only. I have seen on here...

Has anyone any experience of using wheel spacers from the bay? I've been looking at a few sets ranging from £18-£55 now there's a massive difference in price say compared to H&R or Eibach. Is it worth the extra or is this just a case of paying for a name? Here's the eBay numbers of two of...

Thought I would share my experience with 20" Range Rover Sport V-spoke on my new Caravelle. Picked up for £390 off a nice chap over from the RRSPORT forum. Gave me a tenner off for the nail we found in the tyre on collection - repaired by the garage next door for a tenner so all good! Nice round...

Evening all, I recently lowered my 58 plate 2.5 130 T5 T32 on Bilstein B14 coilovers and tried to fit a set of 19" Range Rover Sport alloys with 255/50/19 107Y tyres on them. The inconvenient problem was I need spacers (should have read up on this more). Anyway I have found a set of 15mm...

Bought these off ebay with intentions of needing them for my Pentas to poke out a bit on the rear, but, having the later van combined with the ET of the Pentas all was fine and I didn't need them. I'm selling them for what I won them for and that's £55 + p&p Set of 4, 15mm thick and come...

Just looking for some wheel spacers - loads out there ! Any one fitted some (Iknow you have) but to what size can you go ? Correct in saying tread can not be exposed past wheel arch ?

If you have a T4 van and want to fit some Porsche wheels these are perfect for you!!!! These hub adapters bolt onto your vans hubs and then allow you to fit a set of Porsche wheels with the supplied nuts. They are manufactured by TPi and are made from a aluminum/magnesium alloy and forged for...

Hi, I can't find a definitive answer to this online and the suspension shops I've phoned haven't been able to help either; hopefully someone here has the info. To expand on the title question: How much do the wheels move inwards towards the body for various compressions (30, 50, 80, 100mm) as...

Hi all i gots me a 98 swb t4, am planning to lower front and rear 50mm, ive just won some audi a3 sport alloys, the 5 spoke iron cross looking ones & wondering if anyone can help do i need spacers for them and do i have to use different studs, the et on these wheels is 56 and the width 7 1/2...

I have a 20" alloy offset of ET45, so am quite confident that I could push my wheels out a bit further for both looks, and a bit of extra stability, as I am what one might call a 'keen' driver. Anyway, been looking on eBay (admittedly not exhaustively), and can't find anything with the key...