Good evening all.
This is my first post on the forum as now I can officially say I am an owner. I have a 1.9TD.
After collecting it, I've made a list of all the things I need to do to the van to make it my own. This is going to be worth but expensive!
Firstly, full on service session...
I had a few questions about this as I am sure others do.
Well I did it this afternoon. In the car park with a pair of axel stands.
I am not young but also not old. And could do with losing a bit of weight.
Van jacked up.
Yes I can just get under the side bars.
The biggest issues are the...
Purple Torsion Bars 27mm. I sourced these off ebay.de to fit to my van along with a 26mm rear arb. The van is long gone and I don't think I'll be getting another T4 anytime soon so its time to sell.
T4 Rear Anti Roll Bar 26mm. I removed this from a T4 dropside single cab. Its a...
In the process of lowering the van and mine are seized solid and my mechanic dont fancy taking off the fuel tank to heat up the old ones
So just need pair of adjuster bolts and nuts if possible
I have been working hard on my van conversion over the weekend fitting the split charge cable under the van.
While there I had a good look at the front suspension torsion bars and the treaded bolts where the adjustment needs to be made. On inspecting them I have notice that the...
A great way to stiffen the front suspension, for people who want a sportier ride, either because it has been lowered or has a heavy camper interior.
701 411 103 F|Right|23.8 mm|payload <800kg|white
701 411 104 F|Left|23.8 mm|payload <800kg|white