VW T4 Forum - VW T5 Forum banner

1 - 14 of 14 Posts

·
Meithered to death
Joined
·
2,859 Posts
Not something folk would have on thier PC or those that have it wont be sharing it either,you need a specialist remapping company me thinks or a mapping website but unlikely to find T4 info there.
 

·
Meithered to death
Joined
·
2,859 Posts
There are many members that have custom maps that are over 150bhp on here,however there are not many euro t4s' in the uk that have the factory 150bhp map.This map wont work on uk models because they use wastegate turbochargers and not VNT so the map for controlling them is different
 

·
Premium Member
Joined
·
700 Posts
but paying someone to put the factory 150 map still wont work how you want it to from my understanding.
What engine and mods have you got? You ideally want a custom remap, which costs around £300, then it will be setup to get the most from your engine
 

·
Registered
Joined
·
1,488 Posts
May seem like great expectations but a mate of mine was running 159bhp on his 88 2.5 with injectors and a flash remap.... chipwizards actually turned it down as it was a map, but it made the power!

Chipwizards dont do custom remaps for £100 i know :*I:
 

·
Registered
Joined
·
465 Posts
No, chipwizards didnt do that map, and it certainly wasnt £100.

But the map it went there with and made 159bhp with was a cheapo flash remap
 

·
Registered
Joined
·
644 Posts
Discussion Starter #12
mines a 2.5 tdi 102. i haven't done any thing as yet, getting the .216 injectors, de cat, and remove the edr. i'm just trying to get prepared, or everything at mo, few silly bits to do 1st, u know the usual, cam belt, knocking suspension, those sort of fun bits. there is a bloke down my way he's done quite a few diesel re maps with a fair bit of succes. i know to do it properly i need it rolling roaded, as of building my 16v turbo golf, went all the way to reading to get that done when i finished it off.
 

·
Registered
Joined
·
8,002 Posts
i'm not sure where the best place is to post this but i know someone will help me!! i'm looking for the 150bhp map i know someone must have it somewhere. any help guys?
Speak to Nathan at Wagenworx. He will have a copy of the standard 150bhp map.

Although as said above. Unless you have the AXG or AHY engine with the right turbo it won't do you any good to load that onto your van.
You need a map that's been designed for the engine you have, not a map for an engine that has the power you want to achieve T:

Either way, have a word with Nathan he will explain it better than I can.

http://dandelionworldwide.com/wagenworx/
 

·
Registered
Joined
·
465 Posts
If your fitting the project power injectors then go and see wayne @ chipwizards chap. i know its a long old drive but my god does that fella know his stuff.

Im just a tad further down the road from you and i did the trip the other week and was over the moon with the results until my van started playing silly buggers. if you need help with fitting your new nozzles or anything else T4 related, feel free to give me a shout as im only 15mile away and have done most of the above on my van now!
 
1 - 14 of 14 Posts
Top