VW T4 Forum - VW T5 Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
1,150 Posts
Doesn't look that cheap mate.

The bay listing is for an A4 sized sheet. :eek:
 

·
Registered
Joined
·
679 Posts
I use 3M for wrapping, the carbon stuff is very good to use but take your time fitting it. For best result take your bonnet off and get it somewhere warm for at least 12 hrs along with the vinyl. Make sure you clean the area like you have OCD I: Use a heat gun to gently warm the bonnet and the vinyl, get a mate to help Pull it tight (like a drum) and gently apply it to the bonnet. Use a felt squeegy (from fleabay) to apply starting from the middle slowly working your way out. You will have to heat and GENTLY stretch it around the contours but dont stretch if you don't have to as the glue gets halved as its stretched too.
Hope this helps dude. T:
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top