VW T4 Forum - VW T5 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
645 Posts
Discussion Starter #1
Hi Folks,

I need to fit a new brake light switch to my T4, so I've bought a new one from VW. It looks completely different to the one I have taken out, and has the part number 1C0 945 511A and it's green (the old part number was 1J0 945 511A, and it was black). The guy at the parts counter said make sure it is fitted properly, otherwise the mechanism can break. He didn't have any instructions, other than check the service manual.

My copy of Elsawin doesn't have this part referenced at all. SO, before I destroy it by trying to fit it, does anyone know how it should be fitted, or have a link to fitting instructions etc?

Cheers
Andy
 

·
Registered
Joined
·
3,256 Posts
As far as I,m aware ... Its a half turn (anti clockwise ?? ) to remove , Unplug , plug in to new , pull the plunger out a bit , refit new , and plunger auto adjusts . Do a search , I,m sure there,s a thread on here , somewhere .. seen it in th past .. !
 
1 - 2 of 2 Posts
Top