VW T4 Forum - VW T5 Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1,006 Posts
Discussion Starter #1
Hi. My 94 2.4d gl was converted from auto to manual before i bought her. Whilst having a look around underneath the other day i noticed a bolt was missing from the gearbox mount, its the top one on the mount with the big round rubber bush in. I managed to get hold of a replacement bolt but when i went to fit it, the threaded hole in the gearbox was not lined up with the hole on the mount. I loosened up all the other bolts attached to the mount but there was no way the holes were lining up. My question is : is the mount for an auto box different from the manual and is that the reason the holes are slightly out. Not too worried as the other three bolts are in but would like to get that last one in. Ta:)
 
1 - 1 of 1 Posts
Top