VW T4 Forum - VW T5 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
115 Posts
Discussion Starter #1
Will the Dual Mass flywheel from a 2.5TDi AJT (88Bhp) fit an ACV (102Bhp)?
And will an ACV pressure plate fit the AJT flywheel?
Or put simply are the flywheels the same part with different friction and pressure plates fitted?
I know the friction plates are a slightly different size and have a different amount of splines in the center to allow for the different gearboxes fitted.

I'm asking because I think my flywheel could be knackered. I've found for sale a good second hand flywheel off an AJT. Which I want to fit an uprated fast road clutch to for an ACV, to complement a PP conversion.
I have done a bit of research, but can't seem to find the flywheels with part numbers listed seperately. I can only find flywheels listed sold with clutch kits for the relevant engine. I obviously don't want to buy a set as I want to uprate the clutch.

Any ideas?
 

·
Registered
Joined
·
11,100 Posts
there is such a thing as a solid flywheel available now,but dual mass are available on there own dazboi01 on here listed a number before for a company that supplys them-send him a pm,
a few boys are trying the vr6 clutch with power upgrades
 
1 - 3 of 3 Posts
Top