VW T4 Forum - VW T5 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
Hi Guys,

I've got a 1998 2.4D which needs a new engine. :((It's an AJA)

Can anyone give me a idea of what engine would be an easy conversion? ie. what engine will take my ancillaries, rad, exhaust, loom, clocks etc?:confused:

I'd like a 2.5tdi but dont know how much would be involved.

Any help would be much appreciated.

Cheers
 

·
Somebody stop me!
Joined
·
11,966 Posts
1.9tdi engine will fit but you will need to get some parts from a 1.9d/td engine. Its been done before bud and you wont regret doing the conversion. Have a look at the top of the T4 engine section under the tdi conversion library T:T:T:
 

·
Registered
Joined
·
1,822 Posts
Hi Guys,

I've got a 1998 2.4D which needs a new engine. :((It's an AJA)

Can anyone give me a idea of what engine would be an easy conversion? ie. what engine will take my ancillaries, rad, exhaust, loom, clocks etc?:confused:

I'd like a 2.5tdi but dont know how much would be involved.

Any help would be much appreciated.

Cheers
AAB is essentially the same engine and everything will fit. This is the easiest option, but as Jimmy says you could go for 1.9TDI but it will mea sourcing the relevant 1.9 bits.
 

·
Registered
Joined
·
1,822 Posts
Re. the AAB, I thought there would be issues regarding the flywheel and clutch?
Never known any - only the very last of the AJA engines were fitted with DM flywheel AFAIK but I'm sure someone can put me right if this is not the case. Even if they are different, what's to stop you from swapping :confused:
 
1 - 5 of 5 Posts
Top