VW T4 Forum - VW T5 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,967 Posts
Discussion Starter #1
Evening, just a quick one here. Can anyone confirm or otherwise whether the send and return lines are of differing diameters? I know the return line has an id of 6mm, but have seen differing figures for the send (clear line).

Mine have perished and I'll be damned if I'm paying £100+ for replacements!

Cheers!
Law.
 

·
07415125940
Joined
·
6,646 Posts
Not sure off hand would have to look it up but bang a vernier in the filter in and out and presto
 

·
Registered
Joined
·
4 Posts
Just replaced the feed and return lines on my 2.5 velle due to air in the system from a cracked clear pipe. I refused to pay £100 plus to vw so used quality R9 fuel injection hose at £4 a metre. Feed is 7.6mm and 5.6mm for the return, I measured the metal pipe diameters on the pump with a vernier. I added a small clear inline filter in the feed pipe at the highest point to be able to see any bubbles (the reason for the original clear pipe). Use some decent fuel pipe clips too.
 
1 - 4 of 4 Posts
Top