VW T4 Forum - VW T5 Forum banner
1 - 7 of 7 Posts

Registered
Joined
17 Posts
Discussion Starter · #1 ·
Hello.
I was on here a while back trying to find out where a stray bolt in my belly pan may have come from. Never did find out but on going to change my linkage bush I noticed I have a bracket that is connected to the gear box but has come away from the chassis. Looked on line and I can't find any other pictures of this bracket 馃. Wondering if there should be some sort of rubber mount between the bracket and chassis or does it bolt straight on to the metalwork.
 

Attachments

Registered
Joined
306 Posts
Don't recognise what the 2nd a 3rd pic is, the first one there should be a bung fits in there to cover the two holes, the last pic looks like something should sit in there but no idea what, don't recognise what and where it is.
 

Registered
Joined
17 Posts
Discussion Starter · #3 ·
Looking at the bracket that is highlighted it crossed over the linkage and attached to the chassis. Wondering if there should be some sort of mount in-between the bracket and chassis. The last photo is showing the chassis from behind. I think the bracket should be in front of it as it crosses directly over the linkage otherwise. From the round marking on the chassis wondering if there should be a rubber bobbin like an exhaust mount on there ?
 

Attachments

1 - 7 of 7 Posts
Top