VW T4 Forum - VW T5 Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
24 Posts
did mine today.
glovebox out,
middle plastic out from the floor,
un-clip the wee clips that hold the air box on the left to the box on the middle(with the matrix in it)
undo the 2 10mm bolts from the engine side of the bulk head,
then alot of wiggling, mine came out down to the left.

I could put up pics if anyone's interested
 

·
Registered
Joined
·
24 Posts
Ha Ha, when I hooked up the original matrix it was like turning a tap on!! cottage cheese may have filled the gap!
Poor wooshwoosh thats a shame, I did it in a morning and left the dash alone just removing the low bits






here's a wee pic of the lower of the 2 bolts I was talking about that hold the main box to the bulkhead (tricky to spot)
 

·
Registered
Joined
·
40 Posts
hi. how do you know if the matrix is faulty? Ive got no heat in my t5. Blowers are working ok but no heat. Checked cables and all ok . Could it be the matrix or is it something else??? Any help, thanks
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top