VW T4 Forum - VW T5 Forum banner

1 - 4 of 4 Posts

1,195 Posts
Discussion Starter #1
This is a guide to how i went about fitting a Golf Mk3 spoiler splitter to a post 1996 van (newer rounded bumper shape).

Remove bumper from front. 2 srews eather side near the wheels and 2 bolts under the number plate.

Then get your spoiler and fettle off the plastic with a dremmal.

The dremmal melts the plastic a bit so trim the rubbish off with a knife to make a nice clean edge (this helps the splitter sit tight against the bumper join).

Then using little scews (type are shown in picture) attach the spoiler to the little lip on the bottom of the bumper.

Put everything back together and you get this:

1 - 4 of 4 Posts