Finally done, wih lots of help (OK he did all the work) from Sootinstevey.
Firstly, remove the seat from the van. On pre-96 T4's you only need to undo the rear bolts, as the front of the bases are mushroom bolts, and the base slides off. Remove the seat from the base by undoing the four allen...
HERES AN IDIOT'S GUIDE TO FITTING ANGEL EYES HEADLIGHTS :cool:
Firstly- a shout out to Will at TidyTransporters for lights & great service & Andy (321) for thread below showing how to get the damn grill off!
Unscrew the 5 self tapping screws...
How I fitted my Jag seats. Step by step!!!
(My first one so go easy on me)
Spanners, 15mm, 13mm (x2)
Hss drill bit set (I used 8mm, 10mm plus 4mm pilot)
8no M8 x 50mm bolts and washers (£4 from Wickes)
4no 5mm mild...
This is a guide to how i went about fitting a Golf Mk3 spoiler splitter to a post 1996 van (newer rounded bumper shape).
Remove bumper from front. 2 srews eather side near the wheels and 2 bolts under the number plate.
Then get your spoiler and fettle off the plastic with a dremmal.
First remove seats and base from van.
Slide seat forward and turn over. With a torque allen key remove these two golden bolts.
Slide the seat base forward, remove and put to one side.
turn seat over and with Allen key remove these four golden bolts.
This should leave you with this.