VW T4 Forum - VW T5 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
I'm just about to start my conversion before spring finally arrives! I have bought some load lashing point plastic trim pieces but did not realise at the time that I will also need spacer washers. Does anyone have a part number for these or better still have any lying around that they do not need?

Also, can anyone please let me know the size of spline/torx bit that I need to remove them.

Thanks, Phil
 

·
Registered
Joined
·
51 Posts
I too would like to know what sort of tool you need to get the bolts out. Managed one with a big hex bit but the other at the back won't budge and I have rounded the teeth on the bolt a by bodging it the wrong bit :eek:

Doesn't look like a torx bit would work as it has too many teeth. Anyone know where I can get the right bit from? Halfords don't stock them.

Cheers

Monty
 

·
Registered
Joined
·
159 Posts
Hi,
I used a spline drive socket kit which I purchased from a local auto factor and cost about £10. T:
 
1 - 6 of 6 Posts
Top