hi there, i also fitted Q7 wheels, you will have to machine the centres for the hub. as aluminium is soft i used a general woodworking router. also due to the extra size of the wheels you will have to cut the front bumper slightly to stop the tyre rubbing
I am new on this site and trying to get some information on my 2015 Crafter.
I have a fault code coming up p0087 low fuel rail pressure, I have changed the fuel filter, the fuel pressure relief valve, the fuel pressure sensor, and the high pressure fuel pump, the van is still going into...
We have 2009 Crafter with a single din radio - which we'd like to replace with a dual din Carplay unit.
Does anyone have any guidance as to how we remove the fascia - it has VW part number
I've attached an image of the item currently installed.
After researching in depth for six months we finally selected and purchased a 2019 Crafter camper van. We chose this as it seemed to offer the best driving experience which was important to us.
We purchased in Germany as the model we wanted was difficult to find in the UK (LHD...
I have 2011 Model years Crafter LWB 120 KW Bjm Engine minibus,
Yesterday, i driving minibus, i see the cluster display glow plug light flashing and limp mode minibus, stopped engine. I start the engine problem fixed 3 minutes later glow plug light flashing and limp mode stopped...