Missing Lower Bolt from Rear Shock!!! | VW T4 Forum - VW T5 Forum

1 - 1 of 1 Posts

PhotMan

·

Registered

Joined Aug 18, 2008

·

37 Posts

Discussion Starter • #1 • Mar 29, 2009

My near side rear shock has shed its lower fittings, i.e. Bolt, Dished Washer and both Rubber bearings!!

It's Sunday are there any places that stock this sort of item on the shelf or is it the local VW dealer and his parts department?

I'm a Weymouth person but travel daily to Poole and Bournemouth.

Cheers and I look forward to some suggestions

:ILU:

1 - 1 of 1 Posts

Recommended Reading

Rear rubber spring seat cup thingys.... help!

Steering & Suspension

Hi there! Been struggling to get my T4 to the right lowered height. I have tried 50 and 40mm springs with new standard shocks but the tyre is nearly in the arch. Ive read on here that standard shocks should be fine. After watching lots of videos I saw someone had rubber bushings at the top...
- 0
- 18
- Dborg · updated 3 h ago
Sachs hd or bilstien b6

Steering & Suspension

Hi all just a quick question Which you'll you fit and why Thinking of treating the van 1994 1.9d van lowered and on 18" alloys I feel I would regret not fitting the b6 Thanks
- 5
- 101
- R
  Rowey2006 · updated 5 d ago
Lopsided T4

Steering & Suspension

I suspect that this may have been answered but I can not find it. My N plate T4 camper is a touch down at the front left,. 1cm lower than the right. It has always, in the 2.5 years I have had it, been a touch floaty in bends as well. Rear springs and dampers were replaced about 18 month/4000...
- 8
- 196
- M
  mattsccm · updated 7 d ago
Best place to source a rear 28mm rear ARB?

Steering & Suspension

Hello, I'm struggling to find a rear 28mm rear ARB. Does anyone know of a good breaker in Europe? I already have grey torsion bars and front 27mm to go on, I'm just stuck on the rear ARB atm.
- 0
- 60
- 7ommy_D · updated 8 d ago
Lower ball joint bolt trouble.

Steering & Suspension

Hi guys. I hope someone can help. I'm trying to swap my nearside driveshaft but have run into a snag. A previous owner has rounded out the multi spline bolts on the lower wishbone making them impossible to remove. Has anyone ever experienced this and are there any thoughts on how I might be able...
- 4
- 158
- H
  HenryGunn · updated 10 d ago