VW T4 Forum - VW T5 Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
Hi!

I´m helping a friend that has had the camshaft replaced in his 2009 Multivan.

Car ran fine before but after assembly it won´t start. No sign of ignition at all.
Owner has confirmed that there is fuel coming to the tandem pump but haven´t measured the pressure.

No fault codes present in the ECU or IMMO

I´m don´t know much about these engines but I took some logs with VCDS that I hope can give some clues.

Especially the start synchronization values seems interesting to me. Total value I reach is 48 during cranking.

Hoping someone can take a quick look and see if it looks normal.

 
1 - 1 of 1 Posts
Top