VW T4 Forum - VW T5 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi All!

I need to get the half height bulkhead removed from my T4 so that I can install some swivel seats. Does anyone know anyone who can do this (cheaply) in the london/kent area as i dont have the tools (or skills) to do this myself!

Cheers

Dunny
 

·
Registered
Joined
·
2,064 Posts
Hello & welcome!!

We could get that out for you and tidy it up nice and neat for ........ erm......... £50? T:

We're based in Kent, near Ashford but am down Beckenham way almost once a week if that helps?
 

·
Registered
Joined
·
2,254 Posts
to remove the half bulkhead you'll need a spotweld drill, a cold chisel and a hammer (an angle grinder with a thin cutting disc is also useful).

drill out the spotwelds (requires a gentle touch, try to avoid going all the way through) and then attack the other welds with the chisel/ grinder. once its out, touch up the bare metal with something to hold back the rust, and enjoy....

remember to wear gloves and eye protection (ear defenders aren't a bad idea either), and its all much easier if you unbolt the front seats and put them to one side.

good luck!
 
1 - 5 of 5 Posts
Top