[ScottyKM]

Hi all, I need to see a photo of the underneath of someones T5 who has an eber D2 fitted under the drivers seat.

Have fitted the unit itself, but not installed the inlet/ exhaust pipes yet.
I have a silencer to fit too

anybody help me?

 

[bobley]

I stuck my head under mine a few weeks ago. I couldn't see anything at first and then I spotted that the eber exhaust was firing down the middle of the bus near the main exhaust pipe.

 

[Mines a t5]

Mine fitted internally.

Paul

 

[Mines a t5]

BTW
I drilled and tapped a 6mm hole in the chassis rail for the silencer, then spaced it off with a cut-off piece of 15mm copper tube.
I also had to cut a vertical slot in the undertray to clear the exhaust coming down from the eber, then a horizontal slot where it exits at the side, by the drivers door. I clamped the exhaust pipe to the seam where it exits the underside.
P

 

[Mines a t5]

(pictures shown without undertray fitted!)..........

I wish i could edit my posts!????

 

[ScottyKM]

Paul, thanks for the images.

Will be doing mine fri-sat.
What sealant did you use?

 

[Mines a t5]

It's an automotive silicone, can take quite high temperatures, not that it should get to warm!
p

 

[Mines a t5]

Just looked back on the photo's.

I put a clamp on the silencer connection before putting the shield back on!
P