VW T4 Forum - VW T5 Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter · #1 ·
Hi All

Just recieved my new Kenwood Hu before I fit , does anyone know which cable is the oem mic cable in the quadlock . Thinking of cutting cable and soldering 3.5mm jack on . Anyone done this before?
Thanks
Dave
 

·
Special Rapporteur
Joined
·
10,289 Posts
I think it depends on what model radio was fitted from the factory. Mine had an RCD310 and no wiring was installed for a mic from the factory - they only seem to install what is actually needed these days.

So for most reliable info it's probably best to Google for the pinouts on whatever your original radio was - as an example, an RNS510 uses pins 1 and 7 on connector C.
 
1 - 2 of 2 Posts
Top