VW T4 Forum - VW T5 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
423 Posts
Discussion Starter #1
Hi guys I have just taken delivery of my new wheels and need some help on how measure PDC, the interweb search has so many different ways to check I am not sure on the actual way to measure them, The wheels says 130x5, anyone know the correct way to measure them before I ring the shop tomorrow

thanks for any adviceT:
 

·
Premium Member
Joined
·
6,266 Posts
Find a pan lid / saucer / pot / round thing which is 130mm diameter or draw a 130mm diameter circle on a bit of cardboard and cut it out.

Place it on the back of the wheel in the middle. The edge of the "circular thing" should sit across exactly half the bolt holes if the wheels are 130 PCD.

I presume you really wanted 120mm PCD
 

·
Registered
Joined
·
423 Posts
Discussion Starter #3
after some searching it looks like you measure from the back of a wheel stud hole and then measure to the centre of the adjacent hole, I only ask because the wheels I have say 5 x 130 and yes you are correct it should be 5 x 120,lucky for me it measures 5 x 120 but they are stamped 5 x 130 :*
 
1 - 3 of 3 Posts
Top