VW T4 Forum - VW T5 Forum banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
1,137 Posts
Discussion Starter #1
Hi all had my remap done by Wayne at chipwizard max bhp was 147 great now just arrived in southern Ireland and the van seems to have lost some of its grunt no fault codes starts on the button I thinking it may be the mass air flow meter what ya think also boost pressure is still over 10 psi so it aint the turbo and no smoke only here for a few days I hope so will sort when back in the UK anyone used Vas 5051 to check measured block values and if so can they tell me how also seems it s not as good on fuel cheersT:
 

·
Premium Member
Joined
·
1,137 Posts
Discussion Starter #3
I know it wont be the map I have got access to Vas 5051 which is the same as the main dealers but my knowledge of it is not great when it comes to measured value blocks :(
 

·
Registered
Joined
·
439 Posts
I know it wont be the map I have got access to Vas 5051 which is the same as the main dealers but my knowledge of it is not great when it comes to measured value blocks :(
So there are no faults coming up with your software?

Log 003 or 010 and do a 3rd gear full throttle to redline. You will be looking for 'actual' readings.
 
1 - 7 of 7 Posts
Top