VW T4 Forum - VW T5 Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1
In my T4 800 Special there is a half bulkhead...which I REALLY dont want and want that to be the first job and get it out asap!

Could anybody please give me some guidance on how to remove it!

Thanks

Bradley!

T:
 

·
Registered
Joined
·
617 Posts
Be careful removing the bulkhead , drill out the spot welds or go easy with a mini grinder, or chisel it out, BUT Remove the seat belt reels as heard storys of them going of on the pre tensioners, chieled mine out and now just a few little bits to grind off
 

·
Registered
Joined
·
1,659 Posts
remove the seatbelts !!!! cause a set the drivers one off on mine and it sure scares the $hit out of you,that said it's easy enough,spot weld drill,angle grinder and a hammer and chisel is all you need T:
 

·
Registered
Joined
·
331 Posts
Drilling the spot welds out is the way to go. An angle grinder is also the way to go. I also found the use of a reciprocating saw was invaluable!!!!!
 
1 - 8 of 8 Posts
Top