VW T4 Forum - VW T5 Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I have a 2002 T4, which after careful planning now turns out about 175bhp... and loads of torque.. I have lowered by about 50mm, and would like to fit some steel rims... I have a set of 17" 5 spoke Audi rims, but I really fancy the look of steel..

Can I ask for a bit of help..... can I have some steel rim ideas, ideally 17" or so, but wide as poss, and what technical spec, or from what vehicle..?

Thanks T
 

·
Registered
Joined
·
1,289 Posts
Sorry bud, don't think you will find any 17" steels with a 5x112 pcd. :( If you want to go to 17's you will have to have adaptors or get some wobble bolts. Merc do 16's a favourite for banding & you may even find a VW set in 16". Look for cloese on here he will fix you up with a set of 16's. Oh & have a look in the banded steel section T:
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top