VW T4 Forum - VW T5 Forum banner

1 - 6 of 6 Posts

·
previously known as: baggit
Joined
·
812 Posts
Discussion Starter #1
Steering wheel off and all going well to fit the mfsw, I need to check what the j285 control unit is, can't progress without being sure ?

Any help would be be appreciated
 

·
Registered
Joined
·
37 Posts
Thats the steering column control unit isn't it? Usually bolted on the bottom side of the column but if you let me know what van your working on I will check for you.
 

·
previously known as: baggit
Joined
·
812 Posts
Discussion Starter #4
Here's the instructions I was given


here mate:

There are three missing wires for the MFD that go from the
F138 - Airbag coil connector and return ring with slip ring (grey multiplug for stalks, ect ect)
to
J285 - Control unit in dash panel (speedo)

Stalk------------------- Speedo

PIN 24 goes to pin 21 (MFA+)
Pin 23 goes to Pin 22 (MFA-)
Pin 18 Goes to Pin 23 (MFA-R)
 

·
previously known as: baggit
Joined
·
812 Posts
Discussion Starter #5
Aha didnt take it literal enough, it really is the speedo, the connector at the back
 
1 - 6 of 6 Posts
Top