[Jim Doodle]

Finally did my vagcom scan on my 95 T4, was actually nervous beforehand i thought it might open up a can of worms but...

Chassis Type: 7D - VW Transp T4
Scan: 01,02,03,08,15,17,19,25,35,45,56

-------------------------------------------------------------------------------
Address 01: Engine
Controller: 023 906 024 R
Component: DIGIFANT 1.72 1887
No fault code found.
Readiness: N/A

-------------------------------------------------------------------------------
Address 02: Auto Trans
Controller: 01P 927 733
Component: AG4 Getriebe 01P 2211
Coding: 00000
Shop #: WSC 00000
No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes
Controller: 701 907 379 A
Component: Bremsen-Elektronik
Coding: 0265100071
Shop #: BB 33976
No fault code found.

All clear!!!!!

 

[tidytransporters]

did you use an rs232 cable?

 

[Jim Doodle]

I found this in ebay today for only £3.99

It's a cable that converts the the older 2x2 connector (pre 96) to the new style obdII connector, which should then enable you to use the usual vag-com and other hopefully any other diagnosis tools.

The cable

The connector
Found just above the fusebox under the dash on the drivers side