VW T4 Forum - VW T5 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi, injectors 2 and 3 are ‘dripping’ ie opening too soon, on my T4 1.9TD ABL. All four have been removed and are stanadyne 028130201F.
These were refurbished three years ago by previous owner according to the receipt I have for the work. My question is, what injectors should I get to replace, what is the correct part number? There is obviously an issue with the existing ones because they should fail after three years! I have spoken to project power tdi and they can supply OEM Bosch injectors and just wondering if anybody has any experience of these injectors?
Thanks
Lee
 

·
Full of Cr*p....
Joined
·
9,377 Posts
Don't know "project power tdi", but try to contact Rake (Ron) on this forum....
Loads of threads with his name on them, but mostly for the 2.5 lumps. (Search PP0.5 for example)
Stanadyne are known to be "weak" and fail after a few thousand miles.
"Refurbished" often means just new tips fitted...not the internals!

Rake does his work with a very reputable company, and gives a very good "guarantee" that they will work.
Also the option of uprated ones.......
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Don't know "project power tdi", but try to contact Rake (Ron) on this forum....
Loads of threads with his name on them, but mostly for the 2.5 lumps. (Search PP0.5 for example)
Stanadyne are known to be "weak" and fail after a few thousand miles.
"Refurbished" often means just new tips fitted...not the internals!

Rake does his work with a very reputable company, and gives a very good "guarantee" that they will work.
Also the option of uprated ones.......
Great thank you, appreciate your response
 
1 - 3 of 3 Posts
Top