[jembob]

Hi,

I'm looking to get some alloys for our bus and have seen these on ebay: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250695311807&ssPageName=STRK:MEWAX:IT
MERCEDES SLK WHEELS & TYRES 205/55/16
Not knowing the first thing about wheels I haven't a clue as to whether or not they would fit a t4? Any advice would be greatfully received..

Thanks

Jem

 

[muddyhell]

your looking for wheel with a 5 stud pattern and a PCD of 112..

do a google search for PCD charts and you'll find lots of vehicles running this set up..then of course you hit that wall called..."Are these tyres load rated?"

 

[motobuild]

should do mate.T:

 

[JIMMYJAMES]

Yes! You will need spiggot rings and the correct bolts (radius or tapered seat) and you might have to drill the bolt holes out a fraction to take the T4 bolts. 91v rated are not heavy enough for the weight of the van unless its a bare panel van and you never carry anything. Rule of thumb is to look for XL (extra load) tyres which are considerably more beefy T: