I set 'tear wipe' on my wipers, works well

 

Ah good one to add!!!
Will do it ASAP

 

Turned off the comfort indicators mode it drove me mad !

Wanted to set auto fold mirrors with key fob but can't be done .:ILU:

 

Did the tear wipe! , also added unlock when key is removed, damm is was also looking for Auto close mirrors!
What are confort indicators?
I also added remember driver seat heating setting and if rear screen heating is on to heat up mirrors,
I can not get the close sunrooof and windows if rain is detected any ideas?

 

Did the tear wipe! , also added unlock when key is removed, damm is was also looking for Auto close mirrors! dont' believe its possible
What are confort indicators? they flash 3 times(default) when slightly pushed
I also added remember driver seat heating setting and if rear screen heating is on to heat up mirrors,
I can not get the close sunrooof and windows if rain is detected any ideas? dont' believe its possible

I have a few procedures documented here...here

 

comfort indicators is the quick flash without switching the indicators properly on, default setting is three flashes but I set this to 5. Anyone know how to set it so the rear lights come on as DRL too?

 

Any more updates on this? Pick up the new van from the graphics guys on Friday. First thing ill be doing is plugging it in! Mainly be convenience module settings for locking etc. Want to try and change DRL settings too so that headlights and tail lights are on all the time. Called Scandinavian DRL on my passat.

 

Going to be a total numpty here, but what is a Vcds cable and where do I get one?! :dunno::bhd

Been wondering how to change settings here and there...

 

http://store.ross-tech.com/shop/VCHUC.html

 

I think you need auto wipers to get the windows to auto close when it rains, as it needs the windscreen mounted rain sensor.

 

Got my new van last night and had the laptop straight into it. Few questions though.

1. Lock confirmation beep doesn't work. Ticked appropriate boxes but doesn't work.

2. MFD displays "check safelock" every time the key is removed from the ignition. Is that normal?

3. When it locks, the lock mechanisms seem to go twice with just one click of the key fob? Again is this normal?

Any help for a noob much appreciated.

 

It wont chirp if you dont have a alarm
Tip= always note the original coding down before changing

 

Reading this with interest. My van is in for first service tomorrow. And one of my many requests is for the seat belt bonger to be switched off. They have told me this can't be done.....

Now being of a naturally challenging and inquisitive nature, makes me wonder if this is true?

Any suggestions chaps.

 

There is a black 2 pin multi-plug under your seat just unplug it

(no seat belt warning chimes)

works on a 61 plate

does not put any warning lights on or cause any errors

 

Hi
What were the steps to turn off the seat belt chimes?

Thanks

 

Re the o/p's questions- The double clunk is normal on one press of the remote. It means you don't have selective locking selected so all the doors are opened with one press. Follow Toucanspeed's link to change to selective locking with VCDS. (One press then opens only the driver's door, two presses to open all doors).

Re the alarm chirps and other things, you can run 'Output tests' in the instruments controller and it will activate various chirps/warning chimes/warning lights/dash gauges in turn so you can see/hear what you have on your van. Some of the other controllers have this function (I'd like to know what the BCM on the T5.1 can do) but never use it in the airbag controller....

You probably can't do it with a non registered cable though.

 

Re the o/p's questions- The double clunk is normal on one press of the remote. It means you don't have selective locking selected so all the doors are opened with one press. Follow Toucanspeed's link to change to selective locking with VCDS. (One press then opens only the driver's door, two presses to open all doors).

Re the alarm chirps and other things, you can run 'Output tests' in the instruments controller and it will activate various chirps/warning chimes/warning lights/dash gauges in turn so you can see/hear what you have on your van. Some of the other controllers have this function (I'd like to know what the BCM on the T5.1 can do) yes it doesbut never use it in the airbag controller....

You probably can't do it with a non registered cable though. i've been told you can

If you need screen shots let me know

 

Thanks for the offer No need for the screenshots but I'd be interested to see a full scan of a T5.1 just to see what it looks like. T:

 

Great stuff guys, love it. I've just got my vcds from http://www.amazon.co.uk/gp/product/B00ITPFS7S?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00. vcds ver 12 Brilliant tool.
Looking forward to playing about