Link to the wheels?

 

They're ok I:

 

Craig is a very nice chap.

Very helpful and comms was great. The wheels took almost 3 months to land but they're bloody awesome T:

 

http://www.extremeoffsetwheels.com/street/. They are similar to the black five spokes when you scroll down to the 5x112 section

 

How low is your van in the picture and how big are the wheels

 

I guess you mean the 5x112 for T4 fitment. Only in 8J, no? ET is 0. I guess that would just fit, there does seem to be a picture of a T4. Load rating is not specified, but they appear in 4x4 fitment. Worth asking.

http://www.extremeoffsetwheels.com/street/

 

It's on vogtlands so about 45mm but it's got my entire tool collection in the rear in the photo

They are 17 x 8 fronts et 25. With 205/45 tyres

17 x 9 rears et 30 with 215/45 tyres


Should have gone et 20 rear

 

Nice van! Wheels look great T:

 

I am planning to go 16" with either 8 or 9j front and 9 or 10j rear so they are staggered. Et 30 front and et35 rear what do you think, will they rub and cause problems?

 

Don't think rubbing would be a problem.

You'll need a slider wedge thoughT:

 

I like them but can't seem to find the 5x112 section

 

Found 'em!
Something else on my list!

 

They are a slightly different style to mine. I think they are something like and et 15 front and a et 10 or et 5 rear


The dish is different on mine, they're better viewed in the fleshT:

 

Cheers T: So whats the ET referring to? The dish depth? Ive emailed them to ask if they do staggered in that design but got no reply, will try again or call them tomorrow. £260 for 4 new wheels......bargain! T:A:

 

The et refers to the measurement of the gap between the mounting face that contacts the hub and the actual centre line of the rim. An et 0 would be dead centre of the wheel. Et -10 would be 10mm closer to the rear of the rim giving you more dish. et10 would be 10mm closer to the front (outer face) of the rim giving you less dish.

I think

 

Thanks chief.....think I'm starting to finally understand all the numbers now. T:

 

I do like them with an et of 0 but in a n 8j with my 215\65\16 on think I may get some rubbing!
But I'm also concerned the 0 et will push them out too far!
Doesn't look it on that pic you've shown though!

 

Thinking about a set of either the 16 or the 17's it's the et that's confusing me I'm not after a staggered look I'm just after standerd looking larger steels so what et would I require on 8j?

 

Somewhere between a 30 and a 45 I'd say fellaT:

You'd get a bit of tuck and it would look standard.

Not my preference keeping it at least in line with the outer arch would look much better IMHO